SAS SSDs
Enterprise SAS SSDs — 2.5" SFF for Dell PowerEdge and HPE ProLiant
Enterasource stocks enterprise SAS SSDs in 2.5" SFF form factor for Dell PowerEdge, HPE ProLiant, and Supermicro servers. SAS (Serial Attached SCSI) solid-state drives are the standard high-performance storage media for enterprise RAID configurations — offering faster random IOPS than SAS HDDs, dual-port redundancy for HA deployments, and full SMART monitoring through the server’s RAID controller.
SAS SSDs connect to the server’s SAS HBA or RAID controller (Dell PERC, HPE SmartArray) rather than directly to the motherboard like NVMe drives. This makes them appropriate for systems with existing SAS backplanes and RAID controllers without requiring additional PCIe adapters. Available capacities range from 400GB to 3.84TB across multiple generations (12G SAS and 6G SAS).
All SAS SSDs are tested with SMART data verified and controller-level diagnostics run before listing. Compatible caddies are available separately.
-
HPE P09922-001 400GB MU SAS SFF 12G Solid State Drive | P09105-001Availability: Available by QuoteManufacturer: HPE Condition: R660 1 Year WarrantyRequest PricingOut of stock
SAS SSD vs NVMe vs SATA SSD: Which Is Right for Your Server?
| Interface | Throughput | IOPS (4K Random Read) | Redundancy | Best For |
|---|---|---|---|---|
| SAS SSD (12G) | Up to 1,200 MB/s | 200,000-400,000 | Dual-port (HA capable) | RAID arrays, existing SAS backplanes, HA clusters |
| NVMe SSD | Up to 6,500 MB/s+ | 1,000,000+ | Single-port (standard) | Latency-critical apps, scratch/cache, all-flash |
| SATA SSD (6G) | Up to 550 MB/s | 80,000-100,000 | Single-port | Boot drives, secondary storage, cost-sensitive deployments |
SAS SSDs are the right choice when your server has a SAS backplane and RAID controller already in place, you need dual-port redundancy for high-availability deployments, or you’re expanding existing SAS SSD capacity in a running system. NVMe is faster but requires PCIe connectivity — not all server chassis and RAID configurations support NVMe expansion without additional hardware.
- Are SAS SSDs compatible with all Dell PowerEdge and HPE ProLiant servers?
- SAS SSDs are compatible with any server equipped with a SAS HBA or SAS RAID controller and a 2.5" SFF drive bay. Most Dell PowerEdge (12th gen and newer) and HPE ProLiant (Gen 8 and newer) servers with SAS backplanes support SAS SSDs. Verify your specific chassis configuration and RAID controller model before ordering.
- What capacities are available?
- SAS SSDs are stocked from 400GB to 3.84TB in 2.5" SFF form factor. Inventory varies. Contact us if a specific capacity is not listed.
